Replace Pall MCC1401E100H13 High Flow Filter – Drop-in Compatible Industrial Filter Cartridge

Replace Pall MCC1401E100H13 High Flow Filter – Drop-in Compatible Industrial Filter Cartridge

Replace Pall MCC1401E100H13 High Flow Filter is a direct interchangeable aftermarket filter cartridge for original Pall MCC1401 series. It precisely matches the original overall dimensions, end cap structure, sealing position and inside-out flow path, enabling installation into standard Pall filter housings without any modification. Adopting high-efficiency pleated filter media, this replacement element delivers stable particle interception performance and excellent dirt holding capacity, effectively lowering spare part procurement costs for industrial circulating water, process fluid purification and membrane pretreatment. Numerous water treatment integrators match HFU640UY045H replacement Ultipleat cartridge and RTM41HF050E large diameter filter element with MCC1401E100H13 to build multi-stage filtration systems for steady effluent quality control.

Product Overview

Replace Pall MCC1401E100H13 High Flow Filter is developed as a drop-in substitute for the genuine Pall MCC1401E100H13 high flow filter cartridge. The original MCC1401 series is widely applied in general industrial liquid filtration, yet high original prices and long delivery cycles bring heavy cost and schedule pressure to EPC companies and end users. Our aftermarket replacement solution solves these challenges while meeting the same industrial filtration requirements.

This replacement filter retains the single open-end structure of the original product. Multiple media options are available including resin bonded cellulose, polypropylene and glass fiber pleated media to adapt to different fluid characteristics. Sealing materials such as EPDM, Buna-N and Viton can be selected to cope with aqueous liquid, weak chemical medium and light oil working conditions. The finished products go through strict dimensional inspection, bubble point test and pressure resistance test to guarantee consistent interchangeability and stable filtration performance.

It can efficiently trap suspended solids, rust, sediment and fine colloids, protecting downstream pumps, valves and RO/UF membrane elements. Suitable for long-term 24-hour continuous operation in power, petrochemical, water reuse and desalination projects.

Filtration Principle

Replace Pall MCC1401E100H13 follows the inside-out filtration principle. Under system operating pressure, raw fluid enters the inner cavity of the pleated filter cartridge and penetrates outward through multi-layer filter media. Coarse contaminants are captured on inner pleats, while fine micro-particles are intercepted by outer precision media layers.

Pollutants remain sealed inside the cartridge during replacement, preventing secondary contamination of clean pipelines. Optimized pleat layout reduces fluid dead zones and maintains low initial differential pressure. After purification, fluid flows outwards into subsequent treatment units. Operators shall replace the cartridge in a timely manner once inlet-outlet differential pressure reaches 25–35 PSID to restore the designed flow rate and filtration efficiency.

Core Advantages

100% Drop-in Interchangeable: 

Fully consistent with original size, end cap and sealing standards; no housing modification required to reduce maintenance downtime.

Multiple Customizable Media: 

Cellulose, PP and glass fiber media options support diverse industrial fluid working conditions.

Superior Dirt Holding Capacity: 

Reasonable pleated structure delays pressure difference rise and extends service cycle.

Cost-Effective Alternative: 

Far more competitive than genuine Pall elements with flexible production lead time.

Strict Quality Control: 

Complete testing procedures ensure stable quality for bulk engineering orders.

Main Application Scenarios

Industrial process water and circulating water purification

Seawater & brackish water desalination membrane pre-filtration

Petrochemical fluid impurity removal

Power plant boiler make-up water and auxiliary system filtration

Industrial wastewater reuse advanced filtration

Light hydrocarbon liquid pre-filtration in oil & gas industry

FAQ 

Q1: Can Replace Pall MCC1401E100H13 be directly installed in original Pall filter housing?

A1: Yes. All key dimensions, interface and O-ring positions are benchmarked to original specifications. Direct installation is available without extra accessories.

Q2: What media options can be chosen for MCC1401E100H13 replacement filter?

A2: Standard resin impregnated cellulose media is available. Polypropylene and glass fiber pleated media can be customized for special temperature and chemical resistance demands.

Q3: How to judge the proper replacement time for this filter cartridge?

A3: System differential pressure is the main judging standard. When the pressure difference reaches 25–35 PSID, the media is blocked and replacement is needed. High turbidity raw water requires shorter replacement cycles.

Q4: Can the MCC1401E100H13 replacement cartridge be cleaned and reused?

A4: It is a disposable pleated filter consumable. Once the media pores are blocked by colloids and fine sediment, backwashing cannot fully recover filtration performance, so timely replacement is recommended.

Q5: What information needs to be provided for accurate quotation and model confirmation?

A5: Please provide part number MCC1401E100H13, working medium, operating temperature, required seal material and fluid pH range. Our technical team will confirm compatibility and offer solutions.

You May Also Be Interested In

HFU640UY045H

HFU660CAS010JUW

RTM41HF050E

MFNP050-40N-ITT

POV12UNPFA