Replace Pall MCC1401E100H13 High Flow Water Filter – Drop-in Interchangeable Filter Cartridge

Replace Pall MCC1401E100H13 High Flow Water Filter – Drop-in Interchangeable Filter Cartridge

Replace Pall MCC1401E100H13 High Flow Water Filter is a fully compatible aftermarket substitute for original Pall MCC1401 series pleated filter element. Designed with matched outer dimension, end cap interface, sealing size and inside-out flow structure, this replacement cartridge can be installed directly into standard Pall filter housings without mechanical modification. Adopting resin-impregnated cellulose or optional gradient synthetic media, it delivers stable particle retention performance, outstanding dirt holding capacity and competitive cost advantages for process water, industrial liquid filtration, oil & gas and membrane pretreatment systems. Many water treatment contractors combine HFU640UY045H Ultipleat replacement cartridge and RTM41HF050E large diameter filter element with MCC1401E100H13 to build multi-stage filtration solutions and maintain stable outlet water quality.

Product Overview

Replace Pall MCC1401E100H13 High Flow Water Filter is engineered as direct drop-in replacement for Pall MCC1401E100H13 pleated filter cartridge. The original MCC1401 series is widely deployed in industrial liquid purification and coalescing filtration, yet expensive original parts and long lead times bring procurement pressure for end users. Our aftermarket replacement solves these pain points while meeting the same field filtration requirements.

The replacement cartridge replicates the original single open-end structure, O-ring sealing position and overall length. Standard media is resin bonded cellulose, and glass fiber / polypropylene gradient media can be customized to adapt to different fluid environments. Adopting high-temperature resistant structural components, the element supports continuous operation within -20℃ ~ 110℃. Multiple sealing materials including EPDM, Buna-N and Viton are available to match aqueous medium, light oil and weak chemical fluid.

Strict dimensional verification and bubble point testing are implemented during mass production to guarantee interchangeability. It is suitable for 24/7 continuous heavy-duty operation, effectively removing suspended solids, sediment, pipeline debris and fine colloids to protect downstream pumps, valves and RO/UF membrane modules.

Filtration Working Principle

Replace Pall MCC1401E100H13 filter cartridge follows the classic inside-out filtration principle. Driven by system pressure, raw fluid flows into the inner cavity of the pleated element and penetrates outward through multi-layer pleated media. Large particles and coarse pollutants are trapped on inner pleated layers; fine micro-particles are intercepted by outer precision media.

All contaminants are locked inside the filter cartridge during maintenance, avoiding secondary particle leakage to clean fluid pipelines. Optimized pleat layout reduces fluid dead zones and initial differential pressure. After purification, fluid flows outward and enters subsequent treatment units. Operators need to replace the cartridge promptly once inlet-outlet differential pressure reaches 25–35 PSID to recover designed flow rate and filtration efficiency.

Core Product Advantages

100% Drop-in Compatibility: 

Consistent dimension, end cap geometry and sealing standard with original MCC1401E100H13; no housing modification required, shorten on-site maintenance time.

Stable Filtration Performance: 

Matched cellulose pleated media realizes graded particle interception, long service cycle and slow pressure difference rising trend.

Flexible Material Customization: 

Support cellulose, glass fiber and PP media options to satisfy water, light hydrocarbon and general industrial fluid working conditions.

Cost-Effective Procurement Solution: 

Much lower price than genuine Pall elements, flexible production lead time to avoid project shutdown risks caused by long delivery.

Strict Quality Inspection: 

Each batch undergoes leakage test, pressure resistance test and dimensional inspection to ensure consistent quality for bulk projects.

Main Application Industries

Industrial process water & circulating water purification

Oil & gas pipeline pre-filtration and coalescing separation

Desalination and industrial RO membrane security pretreatment

Petrochemical liquid clarification and impurity removal

Power plant make-up water and auxiliary fluid filtration

Food & beverage raw water pretreatment

FAQ 

Q1: Can Replace Pall MCC1401E100H13 fit original Pall filter housing directly?

A1: Yes. All critical dimensions, interface structure and O-ring position are benchmarked to original specifications. Direct installation is supported without extra accessories or housing adjustment.

Q2: What media options are available for MCC1401E100H13 replacement filter?

A2: Standard version uses resin-impregnated cellulose media. Glass fiber and polypropylene gradient pleated media can be customized for higher temperature or special chemical fluid requirements.

Q3: How to judge the proper replacement timing of this filter cartridge?

A3: The key indicator is system differential pressure. When inlet and outlet pressure difference rises to 25–35 PSID, pollutants block the media and replacement is required. Raw water with high turbidity needs shorter replacement cycle.

Q4: Is MCC1401E100H13 replacement cartridge reusable after cleaning?

A4: It belongs to disposable pleated filter consumable. Once pores are blocked by colloids and fine sediment, backwashing cannot fully restore filtration efficiency. Timely replacement is recommended.

Q5: What information should I provide to confirm the correct replacement model?

A5: Please offer original part number MCC1401E100H13, working medium, operating temperature, required seal material and fluid pH range. Our engineer will verify compatibility and provide targeted quotation.

You May Also Be Interested In

HFU640UY045H

HFU660CAS010JUW

RTM41HF050E

MFNP050-40N-ITT

POV12UNPFA