As a professional filtration supplier, we deliver full-set industrial water treatment solutions. Our HSRO chlorine tolerant RO membrane is heat-sanitizable reverse osmosis membrane customized for food, beverage and industrial sites with chlorinated feed water and frequent disinfection cycles. Produced under ISO 9001 quality control, this spiral sanitary RO membrane element features upgraded anti-oxidation coating to maintain stable desalination performance and extend service life, perfectly matching food factories, pharmaceutical pure water stations and industrial wastewater recycling projects.
As a professional Liquid Filters supplier, we deliver full-set industrial water treatment solutions. Our HSRO chlorine tolerant RO membrane is heat-sanitizable reverse osmosis membrane customized for food, beverage and industrial sites with chlorinated feed water and frequent disinfection cycles. Produced under ISO 9001 quality control, this spiral sanitary RO membrane element features upgraded anti-oxidation coating to maintain stable desalination performance and extend service life, perfectly matching food factories, pharmaceutical pure water stations and industrial wastewater recycling projects.
Reverse osmosis separates impurities via pressure-driven semipermeable membranes. Conventional polyamide RO membranes degrade quickly under residual chlorine and high-temperature sanitization, causing frequent replacement and high operating costs. Our HSRO series solves this pain point: unlike regular brackish water RO membrane, it tolerates trace chlorine in tap water and recycled water, and supports regular hot water disinfection. The standard spiral wound RO membrane full-fit design fits all mainstream industrial pressure vessels, so clients can replace old membranes without overhauling pipelines or pump systems.
This chlorine tolerant RO membrane relies on three core separation mechanisms: physical screening, electrostatic repulsion and anti-chlorine chemical modification. Its cross-linked polyamide thin-film composite layer forms a dense barrier to block salts, organics, suspended solids and bacteria, while letting pure water pass through under operating pressure.
When chlorinated feed water flows across the membrane surface, water molecules penetrate the active layer into the permeate side, and pollutants are concentrated into the brine stream. The membrane surface carries stable negative charges to repel ionic contaminants for higher rejection efficiency. Different from common industrial RO membrane, the special cross-linking treatment creates an oxidation-resistant protective film to stop chlorine from breaking polyamide chemical bonds. This design keeps steady water flux and consistent purity during long-term operation, especially suitable for municipal water with unstable residual chlorine.
The full-fit structure eliminates dead zones inside each RO membrane element, restraining biofilm growth and lowering chemical cleaning frequency.
All HSRO elements follow unified sanitary industrial standards, key RO membrane specifications as below:
Material: Modified anti-chlorine polyamide TFC
Structure: Full-fit spiral wound RO membrane
Standard size: 4040 / 8040
Stabilized salt rejection: ≥99.5% (qualified high rejection RO membrane)
Max continuous operating temperature: 45°C
Max hot sanitization temperature: 85°C
Operating pH range: 2.0–11.0 (continuous); 1.0–13.0 (short cleaning)
Allowable cumulative chlorine exposure: 5,000 ppm-hours
Max feed water SDI: 5
Max pressure drop per element: 1.0 bar
Outstanding chlorine oxidation resistance
Compared with ordinary brackish water RO membrane, the modified polyamide layer bears far higher cumulative chlorine exposure. It avoids rapid performance decline caused by disinfection residues, extending RO membrane lifespan by 30%–45%.
Sanitary hot water disinfection support
No need for large amounts of chemical sanitizers. Hot water cyclic disinfection meets food and pharmaceutical hygiene standards and removes risks of chemical residues in finished water.
Dual anti-fouling performance
As a reliable anti-foulingRO membrane, its smooth hydrophilic surface reduces organic adhesion. The dead-space-free full-fit structure inhibits bacterial reproduction and lengthens cleaning intervals.
Simplified pretreatment system
Standard RO membranes require complete dechlorination devices, while HSRO products tolerate trace chlorine. Clients can lower investment and maintenance work on front-end activated carbon or dosing systems.
Wide pH adaptability & universal compatibility
It supports strong acid and alkali cleaning to remove scale and organic fouling thoroughly. Standard 4040/8040 sizes match existing RO equipment for direct replacement.
Produce purified ingredient water for bottled water, juice, beer and dairy lines. Hot water sanitization prevents microbial contamination and complies with food safety regulations.
Make PW and WFI meeting GMP standards. Chemical-free hot water disinfection eliminates disinfectant residues that disturb cell culture and drug synthesis.
Serves boiler feed water in power plants and pre-treatment ultrapure water for electronics factories. Its chlorine resistance adapts to factory recycled water with disinfection byproducts.
Handles recycled industrial wastewater and municipal tap water with fluctuating chlorine levels, helping enterprises cut freshwater consumption and meet environmental reuse standards.
All HSRO RO membrane element parts are manufactured in ISO 9001 automated workshops, with full batch performance testing for flux, rejection and chlorine resistance. Raw materials comply with FDA food contact requirements, and core models pass NSF drinking water safety certification. Complete test reports and material certificates are provided for factory audits and regulatory filing. Finished membranes are vacuum-sealed with food-grade packaging to avoid secondary pollution during delivery.
Global water scarcity and stricter hygiene rules will push steady market growth of chlorine-resistant reverse osmosis membrane in the next decade. Wastewater reuse policies generate rigid demand for HSRO products, as recycled water always contains residual chlorine that damages common RO membranes. Meanwhile, food and pharmaceutical industries are phasing out harsh chemical disinfectants, making the hot sanitization feature a standard configuration for new water treatment projects.
Our R&D team keeps optimizing anti-chlorine polyamide formulas to boost chlorine tolerance and cut energy consumption. Intelligent monitoring modules will be matched with HSRO elements to realize predictive maintenance and reduce total operation costs. Besides, longer RO membrane lifespan reduces solid waste and chemical discharge, fitting the low-carbon transformation demands of all manufacturing industries.
HSRO chlorine tolerant RO membrane solves two core drawbacks of traditional RO elements: chlorine oxidation damage and inability to support high-temperature sanitization. With modified anti-chlorine separation layers and sanitary full-fit structure, it balances long service life, high salt rejection and chemical-free hot water disinfection. Compared with regular brackish water RO membrane, it lowers pretreatment investment, cuts sanitizer costs and meets strict food & pharmaceutical hygiene standards. For factories using chlorinated tap water or recycled wastewater with regular disinfection demands, this membrane effectively reduces full-cycle water treatment costs. As water management supervision tightens, HSRO chlorine-resistant RO elements will become the preferred solution for new and upgraded industrial sanitary water systems.
Q1: What’s the key difference between HSRO and standard brackish RO membranes?
A1: Ordinary RO polyamide layers suffer permanent damage under low-dose chlorine and cannot stand hot disinfection over 40°C. Our chlorine tolerant RO membrane uses cross-linked modified polyamide to resist chlorine erosion and supports 85°C hot water sanitization; its full-fit design also eliminates dead zones to control biofilm, a feature missing from common industrial RO membrane.
Q2: How long is the standard RO membrane lifespan of HSRO models?
A2: With qualified pretreatment (SDI＜5) and regular sanitization, the RO membrane lifespan reaches 3–5 years, 30%–45% longer than ordinary RO membranes treating chlorinated water.
Q3: Can HSRO directly replace old RO membranes on existing equipment?
A3: Yes. It adopts standard 4040/8040 sizes compatible with all mainstream pressure vessels. No pipeline or pump modification is required; only a heating circulation loop needs adding if hot water sanitization is needed.
Q4: Does chlorine-resistant modification weaken salt rejection capacity?
A4: No. As a certified high rejection RO membrane, its stabilized salt rejection stays above 99.5%, equal to top-grade standard brackish RO membranes without sacrificing permeate purity.
Q5: What pretreatment is still necessary for HSRO systems?
A5: Multi-media filters, 5μm security filters are required to control feed SDI below 5 and stop particle scratches. Dechlorination dosing or carbon filters can be reduced or canceled according to raw water chlorine concentration.
Related Products
Get a FREE Quote
RELATED PRODUCTS
Leave a message
If you want to get more details about filter and filtration equipment, you can send E-mail to filter01@lefilter.com. You can consult our professional engineer and specialized sales team with leave a message in below form. We will contact with you ASAP. You also can visit our factory in Henan China.