High salt rejection industrial RO equipment is specialized reverse osmosis purification unit designed to treat high-salinity raw water and stably produce low-conductivity purified water. It is equipped with high-precision liquid filter as vital pretreatment barrier to intercept suspended pollutants and avoid performance attenuation of high-rejection RO membranes. You can combine it with matched units including Fully Automatic Reverse Osmosis Unit and Compact 5 T/H Reverse Osmosis Equipment for Workshop Purified Water to build complete industrial water treatment workflows. This high rejection RO system efficiently intercepts dissolved salts, heavy metal ions and colloids, delivering stable qualified purified water even when raw water salinity fluctuates. Multiple skid-mounted capacity options suit small workshops and large industrial water stations. Widely applied in chemical, food, new energy and brackish water treatment projects, this article elaborates product composition, working principle, technical indicators, quality standards, application scenarios and typical operation challenges to support your high-salinity raw water purification project planning.
High Salt Rejection Industrial RO Equipment for High Salinity Raw Water
High salt rejection industrial RO equipment is specialized reverse osmosis purification unit designed to treat high-salinity raw water and stably produce low-conductivity purified water. It is equipped with high-precision liquid filter as vital pretreatment barrier to intercept suspended pollutants and avoid performance attenuation of high-rejection RO membranes. You can combine it with matched units including Fully Automatic Reverse Osmosis Unit and Compact 5 T/H Reverse Osmosis Equipment for Workshop Purified Water to build complete industrial water treatment workflows. This high rejection RO system efficiently intercepts dissolved salts, heavy metal ions and colloids, delivering stable qualified purified water even when raw water salinity fluctuates. Multiple skid-mounted capacity options suit small workshops and large industrial water stations. Widely applied in chemical, food, new energy and brackish water treatment projects, this article elaborates product composition, working principle, technical indicators, quality standards, application scenarios and typical operation challenges to support your high-salinity raw water purification project planning.
1. Product Introduction
High salt rejection industrial RO equipment is customized industrial reverse osmosis system developed for factories troubled by high-salinity raw water. Many enterprises use underground brackish water or surface water with high total dissolved solids. Ordinary standard reverse osmosis equipment cannot achieve ideal desalination effect under high salinity conditions, resulting in excessive effluent conductivity and failure to meet process water standards. High salt rejection industrial RO equipment adopts specially selected high-rejection membrane components, optimized operating pressure scheme and matched pretreatment system to realize stable deep desalination.
The whole unit adopts modular skid-mounted integrated design. Anti-corrosion pipeline and pressure vessel materials adapt to high mineralized raw water environment. Front pretreatment assembly is equipped with high-performance liquid filter to intercept sediment, fine particles and colloidal pollutants, reduce pollution load on high-rejection membrane elements and guarantee long-term stable salt rejection performance.
Enterprises can select specifications according to daily water demand: small and medium production workshops can choose compact models such as Compact 5 T/H Reverse Osmosis Equipment for Workshop Purified Water; large industrial bases can deploy multiple sets of high salt rejection RO equipment in parallel, and adopt Fully Automatic Reverse Osmosis Unit to realize unattended operation. If ultra-pure water is required for high-end production processes, this primary high-rejection RO host can be matched with two-stage RO or EDI modules for further deep deionization.
Many water treatment engineers distinguish high salt rejection industrial RO equipment from conventional general-purpose reverse osmosis devices. Common industrial RO membranes are suitable for raw water with low and medium salinity. When raw water TDS rises, salt rejection rate declines obviously. High salt rejection industrial RO equipment is equipped with high-density high-rejection RO membranes. Through precise pressure matching and flow balance design, it maintains excellent interception effect on monovalent and divalent ions. The purified water produced can be used for process batching, equipment cleaning, circulating cooling make-up water and medium preparation. Concentrated separated wastewater can be recycled after recovery treatment. This series high-desalination reverse osmosis equipment has become preferred supporting water treatment facility for factories with brackish water or high-salinity underground raw water.
2. Working Principle of High Salt Rejection Industrial RO Equipment
Reverse osmosis is pressure-driven physical membrane separation technology. Under external driving pressure higher than raw water natural osmotic pressure, water molecules penetrate semi-permeable high salt rejection RO membranes. Dissolved salts, heavy metal ions, colloids and suspended particulate contaminants are trapped on the concentrated water side to realize deep desalination of high-salinity raw water. The core advantage of this equipment lies in high-selectivity membrane material and optimized hydraulic design to maintain stable ion interception efficiency under high osmotic pressure.
The complete factory water treatment workflow is divided into four core stages:
Stage1: Multi-stage precision pretreatment filtration
Raw water sequentially flows through multimedia filter, activated carbon filter and liquid filter. This procedure removes suspended solids, residual chlorine and large colloidal impurities, reduces water turbidity and SDI value, and creates stable qualified inflow conditions for high salt rejection RO main unit.
Stage2: Dosing regulation and pressurization
Anti-scaling agent and biocide are added quantitatively according to raw water salinity and ion composition to suppress membrane scaling and microbial reproduction. Pretreated qualified water is boosted by high-pressure pump to reach the optimal operating pressure of high-rejection RO membrane elements.
Stage3: Reverse osmosis deep purification separation
Pressurized raw water enters membrane pressure vessels. High salt rejection RO membranes intercept ionic pollutants. Water is separated into low-conductivity purified water for industrial production and high-salinity concentrated wastewater. Online sensors continuously track permeate water conductivity to reflect real-time desalination performance.
Stage4: Intelligent monitoring and automatic flushing
PLC control system real-timely monitors conductivity, operating pressure and liquid tank level. Automatic cross-flow flushing activates regularly to wash pollutants attached on membrane surfaces, slow down fouling and stabilize long-term salt rejection rate. Operators can set periodic chemical cleaning cycles according to raw water quality.
For scenarios requiring extremely low conductivity effluent, two-stage high salt rejection reverse osmosis configuration can be adopted.
3. Core Technical Parameters
We provide personalized customized design based on factory daily water consumption, raw water TDS value and process water conductivity requirements. Standard technical indicators of high salt rejection industrial RO equipment are as follows:
Water production capacity: 1m³/h ~ 200m³/h, customizable, covering compact skid-mounted units and large centralized water station systems
Stable single-pass salt rejection rate: ≥99.2% (high-salinity special membrane optional)
System water recovery rate: 60% ~ 75%, adjustable according to raw water salinity
Outlet water conductivity: determined by raw water TDS; two-stage RO option available for conductivity below 10μS/cm
Inlet water requirements after pretreatment: Turbidity ≤1 NTU, SDI ≤5, residual chlorine <0.1mg/L
Working temperature: 5℃ ~ 40℃
Control mode: Full-automatic PLC intelligent control, online continuous conductivity monitoring, high-low pressure protection, automatic membrane flushing
Material specification: Anti-corrosion skid frame; FRP / 304 stainless steel membrane housing; UPVC or stainless steel pipeline; high salt rejection industrial reverse osmosis membrane
4. Product Quality Standard
All high salt rejection industrial RO equipment complies with industrial water treatment equipment manufacturing specifications for brackish water purification.
Firstly, core RO membrane elements adopt high salt rejection reverse osmosis membranes. Supporting liquid filter uses high dirt-holding filter material to guarantee stable pretreatment effect and prevent particles scratching membrane surfaces. High-pressure pumps, sensors and valves select reliable industrial brands suitable for long-term operation under high-salinity water environment.
Secondly, every complete set of equipment passes hydraulic pressure test and 72-hour continuous load running test before delivery. The skid base adopts heavy-duty anti-rust anti-corrosion coating. We supply complete P&ID flow diagrams, installation guidelines and operation manuals.
Thirdly, our professional technical team provides remote online guidance and optional on-site commissioning service. Standardized maintenance plans effectively slow down scaling and organic fouling, stabilize desalination efficiency and ensure long-term stable purified water supply for factories relying on high-salinity raw water.
5. Application Fields of High Salt Rejection Industrial RO Equipment
This high-desalination reverse osmosis purification system is widely applied in multiple industrial sectors with high-salinity raw water:
Factories using underground brackish water: Replace tap water with purified water for production auxiliary water
Fine chemical plant: Raw material synthesis, reagent dilution purified water preparation
Food and beverage production line: Raw material mixing and equipment cleaning supporting water
New energy material workshop: Lithium battery, photovoltaic production process purified water
Medium-sized manufacturing enterprise: Adopt Compact 5 T/H Reverse Osmosis Equipment for Workshop Purified Water
Large industrial water station: Deploy multiple sets of high salt rejection RO units and match Fully Automatic Reverse Osmosis Unit for centralized water supply
Different production processes have strict differentiated limits on effluent conductivity. Our engineers optimize pretreatment scheme, membrane configuration and operating pressure parameters after analyzing local raw water samples, to maintain stable high salt rejection performance all year round.
Frequently Asked Questions
FAQ1
Q: What is the difference between high salt rejection industrial RO equipment and ordinary reverse osmosis systems?
A: Ordinary RO equipment has obvious decline of salt rejection rate under high raw water TDS. High salt rejection RO system uses special high-selectivity membrane elements and optimized pressure design, which can keep stable high desalination efficiency when treating brackish water and high-salinity raw water.
FAQ2
Q: How to select supporting equipment for high salt rejection industrial RO system?
A: According to daily water consumption, you can choose matched models such as Compact 5 T/H Reverse Osmosis Equipment for Workshop Purified Water and Fully Automatic Reverse Osmosis Unit. The front pretreatment must be equipped with complete filtration including liquid filter.
FAQ3
Q: What function does liquid filter perform inside high salt rejection industrial RO equipment?
A: Liquid filter intercepts sediment, colloids and suspended particles in raw water, prevents scratch and blockage of high-rejection RO membrane surfaces, reduces chemical cleaning frequency and maintains stable long-term salt rejection performance.
FAQ4
Q: Can high salt rejection industrial RO equipment run 24 hours continuously all year round?
A: Yes. The whole set is optimized for continuous industrial operation. With standardized pretreatment management and regular maintenance, it can realize stable long-term operation to meet uninterrupted production water demand.
FAQ5
Q: Is two-stage reverse osmosis necessary for all high-salinity raw water projects?
A: Single-stage high salt rejection RO satisfies general process water requirements. Two-stage reverse osmosis is recommended if customers need ultra-low conductivity purified water for precision manufacturing processes.
FAQ6
Q: What regular maintenance should be carried out for high salt rejection industrial RO equipment?
A: Regularly replace filter cartridges inside liquid filter; maintain reasonable anti-scaling agent dosage; activate automatic membrane flushing; record inlet and outlet conductivity data every day; conduct chemical cleaning timely once scaling causes desalination efficiency decline.
Other products you may want to know about:
Automatic Back-flushing Filter
Get a FREE Quote
RELATED PRODUCTS
Leave a message
If you want to get more details about filter and filtration equipment, you can send E-mail to filter01@lefilter.com. You can consult our professional engineer and specialized sales team with leave a message in below form. We will contact with you ASAP. You also can visit our factory in Henan China.