Wire Wound Filter Cartridge

Introduction

Wire-wound filter element is a kind of deep filtration core, used for low viscosity, low impurity quality filtration, is a textile fiber line (polypropylene line, skimmed cotton line, etc.), according to a specific process of precision winding in the porous skeleton (polypropylene or stainless steel) made of the above, with a sparse outside and inside the dense honeycomb structure, can effectively remove the fluid in the suspended particles, particles, rust, and other contaminants, has a very good filtration characteristics.

A good wire-wound cartridge can show the filtration effect of depth-type filter media, the ideal condition is from the outside to the inside more and more dense, therefore, in the winding, must be the thickness of the wire or different winding tension to control the density of the filter material, with this dense inside and outside of the sparse structure of the wire-wound cartridge, in order to have the depth of the depth-type filter media to effectively enhance the efficiency of filtration, intercepting more particles of dirt and impurities.

The filtration accuracy of wire-wound filter media is determined by the thickness of the wire and the density of the winding. The finer the wire, the more closely it can be held together, the smaller the pores and the higher the accuracy; and the more dense the structure of the same wire, the higher the filtration accuracy. However, in the process of filtration, the filter material must be able to maintain its specific structure and pore size in order to provide stable and uniform filtration quality.

Product Features 

High filtration precision, high flow rate, low differential pressure, high pressure strength, large dirt-holding capacity, non-toxic, odorless, no secondary pollution.

High filtration precision, small differential pressure, large flow rate, large dirt-holding capacity, long service life; 

Filtering aperture is small inside and large outside, with a good deep filtration effect; 

Wire wound cartridge is made of different kinds of materials, which ensures the filtration of various liquids, and achieves the best filtration effect, and the filter element is made of different kinds of materials.

Product Principle 

Wire-wound cartridges are made of textile fibers wrapped in a specific way around multiple skeletons. When winding, the density of filter element can be controlled to make different filtration precision filter element. The filtering aperture of the cartridge is large outside and small inside, which has excellent deep filtration effect. Efficacy of wire-wound cartridge: wire-wound cartridge can effectively remove suspended solids and particles in liquid. Large flow rate, small pressure loss. High slag load and long service life. It can withstand high filtration pressure. According to the nature of the liquid to be filtered, the filter element has a variety of different materials to choose from, so that the filter element has good compatibility with the filtrate.

Technical parameters 

Applicable PH value :1-13 

Working pressure: polypropylene skeleton 0.6Mpa, stainless steel skeleton 0.8Mpa 

Working temperature: glass fiber 90 ℃, skimmed cotton fiber 120 ℃, other 90 ℃ C 

Filter cartridge length :10“, 20”, 30", 40 " 

Cartridge Diameter:Ф65mm 

Pharmaceutical Industry:Pre-filtration of various injections, pharmaceuticals and injection washing water, I.V. fluid and various antimicrobials, Chinese medicine injections.

Application areas 

Food industry: alcohol, beverage, drinking water filtration.

Electronic industry: pre-filtration of pure water and ultra-pure water.

Petroleum and chemical industry: filtration of all kinds of organic solvents, acids and alkalis, and filtration of oilfield water injection.