Dow membrane filters SW30HRLE-400 is a high-efficiency seawater reverse osmosis membrane widely used for seawater desalination paired with ultrafiltration pretreatment. This liquid filter protects the membrane module by removing suspended particles and colloids to reduce feed water SDI value. Our [HFU640UY045JUW high flow filter cartridge](#) serves as the ideal pre-filter for Dow membrane filters SW30HRLE-400, working together with [seawater reverse osmosis element](#) to reduce membrane fouling risk. Our high flow pre-filter cartridges are engineered for seawater desalination projects, offering stable particle retention and low pressure drop to extend the service life of Dow SW30HRLE-400 membrane elements and ultrafiltration systems.
Dow membrane filters SW30HRLE-400 with Ultrafiltration Pre-treatment
Dow membrane filters SW30HRLE-400 is a high-efficiency seawater reverse osmosis membrane widely used for seawater desalination paired with ultrafiltration pretreatment. This liquid filter protects the membrane module by removing suspended particles and colloids to reduce feed water SDI value. Our HFU640UY045JUW high flow filter cartridge serves as the ideal pre-filter for Dow membrane filters SW30HRLE-400, working together with seawater reverse osmosis element to reduce membrane fouling risk. Our high flow pre-filter cartridges are engineered for seawater desalination projects, offering stable particle retention and low pressure drop to extend the service life of Dow SW30HRLE-400 membrane elements and ultrafiltration systems.
Dow membrane filters SW30HRLE-400 is a premium seawater reverse osmosis membrane element designed for seawater desalination. It can separate salt ions from raw seawater to produce fresh water. However, seawater contains sediment, algae, suspended solids and organic colloids, which will quickly foul and damage the RO membrane surface without reliable pretreatment. Ultrafiltration systems combined with high flow pre-filtration cartridges form the essential pretreatment workflow for Dow membrane filters SW30HRLE-400. Our High-Flow Pod Filter is specially developed as the primary pre-filter before ultrafiltration equipment for seawater desalination projects.
The complete water treatment sequence for seawater desalination is raw seawater intake → high flow filter cartridge → ultrafiltration system → Dow membrane filters SW30HRLE-400. The high flow filter cartridge intercepts large particulate contaminants in advance, the ultrafiltration membrane further removes fine colloids and micro-organisms, so the feed water entering Dow SW30HRLE-400 membrane meets strict SDI requirements. For seawater with high turbidity, we also supply Glass Fiber Filter Cartridge as secondary filtration media to further optimize water quality and reduce the pollutant load on ultrafiltration and RO membranes.
We provide a full series of high flow filter cartridges for protecting Dow membrane filters SW30HRLE-400 and ultrafiltration equipment. We offer polypropylene, glass fiber and composite pleated filter media, multiple end cap styles and sealing options to fit most standard filter housings. Our filter cartridges can also replace mainstream brand filter elements, such as our Pall Ultipleat High Flow Element replacement series. Whether for small skid-mounted seawater desalination units or large coastal desalination plants, our pre-filtration cartridges can be customized to match the flow rate and raw seawater conditions for Dow SW30HRLE-400 membrane systems.
The whole pretreatment system protecting Dow membrane filters SW30HRLE-400 includes high flow liquid filter cartridges and ultrafiltration membranes. The high flow pleated filter cartridge adopts combined surface filtration and depth filtration. Raw seawater flows into the filter housing and enters the outer layer of the high flow filter cartridge. Solid particles, seaweed fragments and large sediment are trapped on the pleated filter media surface. The preliminarily filtered seawater flows into the inner core of the cartridge and flows to the ultrafiltration unit.
The ultrafiltration membrane uses pressure-driven separation to capture tiny colloids, bacteria and micro-particles that pass through the high flow filter. After ultrafiltration treatment, the SDI value of seawater is controlled within the standard range, which is the necessary precondition for safe operation of Dow membrane filters SW30HRLE-400. The pleated structure of high flow filter greatly increases filtration area, delivering high throughput while maintaining low differential pressure. This reduces the number of filter cartridges required in the housing and minimizes frequent replacement work for large desalination plants.
Our Replace Pall Water Filter Element uses the same pleated high flow filtration principle for seawater pretreatment. Operators monitor inlet and outlet pressure difference of filter housings. When differential pressure rises to the preset threshold, the filter cartridge needs replacement to restore filtration capacity, preventing excessive pollutants from entering ultrafiltration and Dow SW30HRLE-400 membrane elements.
| Item | Specification |
|---|---|
| Filter Media | Polypropylene / Glass Fiber / Composite pleated media |
| Filtration Rating | 1μm, 5μm,10μm,20μm,50μm |
| Single Cartridge Flow | Up to 110 m³/h under rated operating condition |
| Max Operating Pressure | 10 bar |
| Operating Temperature | 0~80℃ (depends on filter media) |
| Sealing Material | EPDM, Silicone, FKM |
| Standard Length | 40 inch, 60 inch |
| End Cap Type | Single open / double open, standard industry connector |
| Liquid Compatibility | Seawater, industrial raw water, weak acid, weak alkali aqueous solution |
The selection of pre-filtration cartridges for Dow membrane filters SW30HRLE-400 depends on raw seawater turbidity, salinity and system design. Higher filtration precision will reduce the maximum flow rate, so we balance flow capacity and particle retention efficiency for each seawater desalination project. Our Equivalent Pall Filter HFU660GF060H13 follows the same technical specifications and can directly replace original filter elements without modifying existing filter housings.
All pre-filtration cartridges for Dow membrane filters SW30HRLE-400 go through strict multi-stage quality inspection during manufacturing. Raw filter media will be tested for bubble point, tensile strength and chemical compatibility before pleating and assembly. After folding, thermal welding and end cap bonding, every finished high flow filter will undergo bubble point leak detection individually, to check for pinholes, media damage and sealing defects.
We produce in accordance with ISO industrial filtration standards. Material certificates, batch inspection reports and bubble point test records can be provided for project bidding, factory audit and customer verification. Accelerated fouling simulation tests are carried out in our factory to verify long-term stability of filter cartridges under real seawater operating conditions.
Our professional technical team offers full lifecycle technical support, including system flow calculation, filter housing selection, installation guidance and maintenance training for pre-filtration cartridges, ultrafiltration and Dow SW30HRLE-400 RO membrane systems. We also provide after-sales consultation on cartridge replacement, pressure difference monitoring and membrane fouling prevention solutions for seawater desalination projects.
The combination of high flow pre-filter, ultrafiltration equipment and Dow membrane filters SW30HRLE-400 is widely adopted in seawater desalination and related water treatment industries.
Coastal Seawater Desalination Plants High flow pre-filters and ultrafiltration remove sediment, algae and suspended solids from raw seawater, protecting Dow membrane filters SW30HRLE-400. The system turns seawater into fresh water for municipal water supply and industrial production.
Island Water Supply Projects For remote islands without freshwater resources, the integrated ultrafiltration + Dow SW30HRLE-400 RO system provides reliable drinking water, with high flow filter cartridges as the first protection barrier.
Power Plant Seawater Desalination Coastal power plants use this combined system to produce boiler make-up water from seawater. Pre-filtration and ultrafiltration reduce impurity load and extend the service life of Dow membrane filters SW30HRLE-400.
Chemical Industry Seawater Utilization Chemical factories near the coast adopt ultrafiltration and Dow SW30HRLE-400 RO membrane to convert seawater into process water, with high flow filter cartridges as pretreatment.
Offshore Platform Water Treatment Offshore oil and gas platforms use compact skid-mounted ultrafiltration and Dow membrane filters SW30HRLE-400 to produce drinking and process water from seawater.
Municipal Water Reclamation Some coastal municipal projects use this solution for water resource recycling, combining pre-filtration, ultrafiltration and Dow SW30HRLE-400 membrane for water purification.
A: Dow membrane filters SW30HRLE-400 is a high performance seawater reverse osmosis membrane element for seawater desalination, which requires ultrafiltration and high flow pre-filtration as pretreatment.
A: Raw seawater contains sediment, colloids, algae and suspended particles. Pre-filtration and ultrafiltration trap these contaminants in advance, preventing fouling and scratch damage to Dow membrane filters SW30HRLE-400 and reducing membrane cleaning frequency.
A: Main media choices include polypropylene, glass fiber and composite pleated media. PP media suits general seawater pretreatment; glass fiber works well for high-turbidity seawater and fine particle filtration.
A: Monitor pressure difference between filter inlet and outlet. When differential pressure rises to the preset limit, the filter cartridge is clogged and needs replacement to restore filtration performance and protect ultrafiltration and RO membranes.
A: Yes. We support customized filtration rating, sealing material, cartridge length and end cap structure to match different ultrafiltration and Dow RO membrane systems and seawater working environments.
A: Yes. Our high flow filters can replace mainstream brand high flow filter elements including Pall series elements, and no housing modification required.
Other products you may want to know about：
Get a FREE Quote
RELATED PRODUCTS
Leave a message
If you want to get more details about filter and filtration equipment, you can send E-mail to filter01@lefilter.com. You can consult our professional engineer and specialized sales team with leave a message in below form. We will contact with you ASAP. You also can visit our factory in Henan China.