Replace Pall MCC1401E100H13 High Flow serves as a compatible interchangeable element for industrial ultrafiltration pretreatment systems. This liquid filter references original dimension standards to deliver comparable filtration performance for large‑volume water‑treatment projects. It can cooperate with Replacement Pall Water Filter and 3M High Flow Filter to capture suspended solids, silt and colloidal contaminants, offering practical pre‑treatment protection for downstream ultrafiltration membrane modules. This alternative solution may help buyers shorten procurement lead‑time and optimize long‑term operational expenditure.
Replace Pall MCC1401E100H13 High Flow for Ultrafiltration Pretreatment
Replace Pall MCC1401E100H13 High Flow serves as a compatible interchangeable element for industrial ultrafiltration pretreatment systems. This liquid filter references original dimension standards to deliver comparable filtration performance for large‑volume water‑treatment projects. It can cooperate with Replacement Pall Water Filter and 3M High Flow Filter to capture suspended solids, silt and colloidal contaminants, offering practical pre‑treatment protection for downstream ultrafiltration membrane modules. This alternative solution may help buyers shorten procurement lead‑time and optimize long‑term operational expenditure.
Ultrafiltration membrane service conditions are greatly affected by upstream pre‑filtration capacity, and Replace Pall MCC1401E100H13 High Flow is developed as a compatible spare consumable for this critical pretreatment link. As an interchangeable alternative for original Pall MCC1401E100H13, this radial‑pleated filter follows original reference for outer diameter, inner bore, end‑cap geometry and handle‑type connection interface. Site operators may complete element swap inside existing filter housings; in most application scenarios, users do not need to modify pipelines or flange structures.
Numerous water‑treatment projects applying original brand spare parts face extended delivery lead‑time and relatively high component costs. Replace Pall MCC1401E100H13 High Flow addresses these common market pain points. It can build multi‑stage filtration combinations with High Flow Pleated Filter Cartridge before raw water enters ultrafiltration membrane vessels, removing large‑granule impurities from incoming water source. Compared with traditional small‑size filter cartridges, one single high‑flow element can handle flow volumes that normally need multiple standard‑size cartridges. Fewer elements installed inside filter housing may lower installation workload, shorten maintenance operation hours and reduce waste‑handling burden.
This replacement filter adopts high‑purity virgin polypropylene raw material and radial pleated layout, which expands effective filtration area and improves dirt‑holding capacity. Thermal‑fusion welding connects filter media and end‑caps instead of adhesive bonding, lowering possibilities of glue‑induced contamination to process water. Within recommended working pressure ranges, the media tends to minimize fiber shedding, which helps reduce risks of secondary water contamination and surface abrasion to costly ultrafiltration membranes. For EPC contractors, water‑plant operators and system integrators, Replace Pall MCC1401E100H13 High Flow provides a balanced option covering filtration capability, procurement budget and spare‑part supply stability.
Replace Pall MCC1401E100H13 High Flow adopts radial pleated depth filtration mechanism. Raw water flows into filter housing and reaches the outer pleated surface of cartridge. Water travels radially from outside toward inner core through multi‑layer polypropylene filter media. Solid particles, silt, iron‑oxide sediments, colloids and suspended impurities are trapped on media surface and inner depth layers. Treated water flows out from central inner core and transfers to downstream ultrafiltration equipment.
Radial pleated design enlarges available filtration area under fixed cartridge outer dimensions. Along with continuous system running, intercepted contaminants keep accumulating, raising differential pressure value between filter inlet and outlet. When differential pressure reaches suggested threshold, site teams will arrange cartridge replacement work. This process relies purely on physical interception, no chemical additives are introduced into process water, so original water chemical properties stay largely unchanged.
In a complete ultrafiltration workflow, Replace Pall MCC1401E100H13 High Flow acts as front‑line protective barrier for ultrafiltration membranes. It removes most coarse contaminants in advance, eases pollutant burden on membrane surfaces and lowers particle‑scratch possibilities. When designing pretreatment sequences, users may pair this cartridge with Large Flow PP Water Filter Cartridge for multi‑stage graded filtration. Such configuration can further decrease operating load on ultrafiltration modules and support longer continuous system running periods.
| Item | Specification |
|---|---|
| Replacement Model | Replace Pall MCC1401E100H13 High Flow |
| Filter Media | Polypropylene (PP), radial pleated |
| Nominal Micron Rating | 100 μm |
| Common Length | 40 inch |
| Interface | Pall‑compatible handle‑style end‑cap |
| Single Cartridge Max Flow Rate | Up to 110 m³/h (varies with raw‑water quality) |
| Maximum Operating Temperature | 60 ℃ |
| Max Suggested Differential Pressure | 3.4 bar |
| Chemical Compatibility | Suitable for most neutral aqueous solutions |
| Typical Application | Ultrafiltration pre‑filtration, RO security filtration |
Every Replace Pall MCC1401E100H13 High Flow filter cartridge follows standardized manufacturing workflows and multi‑step quality checkpoints. Production prioritizes virgin‑grade polypropylene raw material options to support stable filter media performance. A series of assessments, including bubble‑point testing, pressure cycle evaluation and fiber‑shedding checks are performed for finished units prior to shipment.
Thermal‑welding technology connects filter media and end‑caps, aiming to deliver reliable bonding performance under typical water‑treatment operating conditions. Dimensional measurements are referenced against original housing specifications to support compatible installation. Production records are maintained for each batch to support traceability.
Sample units undergo testing under simulated industrial water‑treatment conditions. Long‑duration high‑flow cycling assessments help evaluate structural performance under common working scenarios. Products are built to align with widely‑accepted industrial water‑treatment component guidelines. Properly selected and maintained filter elements may help reduce unplanned system downtime and support optimized operational costs for end‑users.
Replace Pall MCC1401E100H13 High‑Flow replacement filter cartridge is mainly considered for ultrafiltration system pre‑filtration protection, covering multiple industrial sectors:
Industrial Pure‑Water Production: Pre‑filtration for ultrafiltration units within electronics, food and beverage facilities, intercepting silt and granular impurities to protect ultrafiltration membrane modules.
Municipal Water Reuse Project: Pretreatment for municipal reclaimed‑water ultrafiltration processes, coping with high‑volume raw water carrying elevated suspended‑solid content.
Seawater Desalination Pretreatment: Used as front‑end security filtration paired with ultrafiltration devices, reducing pollutant load for subsequent processing steps.
Pharmaceutical & Cosmetic Process‑water System: Removing granular contaminants from process water to meet pretreatment requirements for preparation‑water ultrafiltration.
Mine and Industrial Wastewater Recycling: Filtering recycled wastewater ahead of ultrafiltration recovery steps, which may lower membrane fouling frequency.
Industrial‑park Centralized Water Supply: Pre‑filtration for large‑scale centralized ultrafiltration water‑supply systems.
Users may adjust configuration according to raw‑water quality and project budget. For heavily polluted incoming water, multi‑stage graded filtration setup is recommended to potentially extend filter service cycles. For high‑purity process‑water projects, finer‑precision filter grades can be selected.
A: This replacement element references original end‑cap structure and dimension standards. It fits matching filter housings and normally requires no pipeline modification. Please confirm cartridge length and micron rating before placing orders.
A: It functions as ultrafiltration pre‑filtration protection. It captures suspended solids, silt and colloidal contaminants, reduces pollutant load reaching ultrafiltration membranes, and may slow down membrane fouling to extend membrane service cycles.
A: Service cycle is mostly affected by raw‑water quality and actual operating flow rate. It is suggested to replace cartridge when inlet‑outlet differential pressure reaches 2.5‑3.4 bar. Poor‑quality raw water tends to shorten service time.
A: Yes. It can serve as security pre‑filter for large‑scale reverse osmosis projects. Select suitable micron rating based on your RO membrane operating requirements.
A: Custom length, micron precision and special interface can be reviewed. Please provide filter housing drawing or original part number; our technical team will carry out feasibility assessment and prepare formal quotation.
A: Suggested maximum continuous operating temperature is 60 ℃. Long‑time operation above this temperature may deform polypropylene filter media and influence filtration performance.
Other products you may want to know about:
Get a FREE Quote
RELATED PRODUCTS
Leave a message
If you want to get more details about filter and filtration equipment, you can send E-mail to filter01@lefilter.com. You can consult our professional engineer and specialized sales team with leave a message in below form. We will contact with you ASAP. You also can visit our factory in Henan China.