PP Melt-blown Filter Cartridge

Working PrincipleIt mainly uses activated carbon organic coagulum with high carbon content, large molecular weight and large specific surface area to physically adsorb impurities in water to meet water quality requirements. When water flows through the pores of activated carbon, various suspended particles, organics, etc. are adsorbed in the pores of activated carbon under the action of van der Waals force; at the same time, chlorine (hypochlorous acid) adsorbed on the surface of activated carbon undergoes chemical reaction on the surface of activated carbon, and is reduced to chloride ions, thus effectively removing chlorine, ensuring that the residual chlorine in the effluent is less than 0.1ppm, meeting the operating conditions of RO membrane. As the retained substances in the pores of activated carbon and particles increase over time, the pressure difference before and after the filter cartridge rises until it fails.

• Power industry: Water filtration for power plant systems

• Reverse osmosis pre-treatment: Pre-filtration for RO systems

• Petrochemical industry: Filtration of chemical process fluids

• Food and beverage industry: Production water filtration

• Environmental water treatment: Industrial wastewater pre-filtration

• Automobile, metallurgy, paper making, pharmaceutical, microelectronics industries: Process water filtration

• Filtration Precision (μm)	1	3	5	10	20	30	50
  Initial Precision (μm)	10-15	15-25	25-35	30-40	35-50	40-60	60-90
  Maximum Particle (μm)	15	25	35	40	50	60	90

• Item	Specification
  Filter Cartridge Interface	Flat type, 226, 222, and other non-standard interfaces
  Filter Cartridge Skeleton	Polypropylene skeleton, stainless steel skeleton (special specifications can be customized)
  Length	5", 10", 20", 30", 40", 50", 60"
  Outer Diameter (±1mm)	60-115mm
  Inner Diameter (±1mm)	28.30mm
  Maximum Pressure Resistance	≤0.5MPa
  Maximum Pressure Drop	0.2MPa