HYDRAcap®MAX60 Industrial Grade UF Module Nitto​ Equivalent

Product Introduction

The HYDRAcap®MAX60 Industrial Grade UF Module is a high-performance ultrafiltration (UF) solution engineered to provide exceptional water quality, reliable system operation, and extended membrane life in demanding industrial and municipal water treatment applications. As a direct equivalent to Nitto Hydranautics HYDRAcap®MAX60, this module integrates seamlessly into existing systems, offering significant cost savings and operational efficiency.

Manufactured with advanced polyethersulfone (PES) hollow fiber membranes, the HYDRAcap®MAX60 equivalent delivers exceptional separation performance while maintaining low fouling tendencies. The module uses a pressurized outside-in flow configuration, ideal for high solids loading and large flow capacity. Designed with an 85 m² membrane surface area, it increases throughput without increasing footprint, making it especially valuable in retrofit or expansion projects.

From drinking water production and wastewater reuse to RO pretreatment and process water recovery, the HYDRAcap®MAX60 module ensures consistent and reliable filtration in line with the highest industry standards.

Working Principle

The HYDRAcap®MAX60 UF module operates on the outside-in filtration principle using hollow fiber membranes. This method ensures effective contaminant removal while minimizing clogging and energy use.

How It Works:

1.    Raw water enters the module shell and flows around the exterior of the hollow fiber membranes.

2.    Contaminants like suspended solids, bacteria, viruses, and colloids are retained on the membrane’s outer surface.

3.    Permeate (clean water) passes through the 0.03 µm membrane pores and is collected inside the fiber lumens.

4.    The filtered water is directed out of the module for further use or processing.

5.    When the system detects a performance drop or reaches a preset time/pressure threshold, backwash, air scour, or chemical CIP (Clean-In-Place) processes are activated to clean the membrane surface.

This process allows continuous water treatment while maintaining membrane integrity and extending operational life.

Key Features

✅ Nitto Hydranautics HYDRAcap®MAX60 Equivalent
Fully compatible in physical size, connection points, and hydraulic performance, allowing direct replacement without modification.

✅ High Membrane Surface Area (85 m²)
Increased surface area enables higher filtration capacity with fewer modules, lowering capital and operating costs.

✅ Advanced PES Membrane
Constructed from polyethersulfone (PES) for high durability, wide chemical tolerance, and long-term membrane stability.

✅ Precision Filtration (0.03 µm)
Removes pathogens, turbidity, and particulates, ensuring consistent water quality even with varying feed water conditions.

✅ Robust Construction
Designed to handle high operating pressures and temperatures with optional PVC, ABS, or stainless steel housings.

✅ Energy-Efficient Design
Operates at low transmembrane pressure, helping reduce energy consumption and operating expenses.

✅ Automated Cleaning Options
Supports air scouring, backwashing, and chemical CIP to maintain peak performance and extend lifespan.

✅ NSF and ISO Compliant
Manufactured in line with global water safety and quality standards.

Technical Parameters

Applications

The HYDRAcap®MAX60 module is suitable for a wide range of water treatment applications:

1. Municipal Drinking Water

Removes bacteria, viruses, turbidity, and organics from surface or groundwater to meet drinking water regulations.

2. RO Pretreatment

Provides reliable pretreatment to reduce SDI and prevent fouling of reverse osmosis membranes, increasing overall system efficiency.

3. Wastewater Reuse

Filters treated municipal or industrial wastewater for non-potable reuse, including irrigation, cooling, and flushing systems.

4. Seawater Desalination Pretreatment

Effectively reduces the fouling load on SWRO membranes by removing suspended solids and biological contaminants.

5. Industrial Process Water

Delivers consistent, high-quality water to electronics, textiles, chemicals, food and beverage, and pharmaceutical manufacturing.

6. Cooling Tower & Boiler Feed Water

Reduces impurities in water used for cooling and steam generation, extending system life and improving efficiency.

FAQ

1. Is the HYDRAcap®MAX60 UF module interchangeable with the Nitto HYDRAcap®MAX60?
Yes, it is designed as a dimensionally and hydraulically compatible replacement, suitable for direct system retrofit or expansion.

2. What size particles can the membrane remove?
The membrane removes particles down to 0.03 microns, including most bacteria, viruses, suspended solids, and colloids.

3. How often should I clean the membrane?
Cleaning intervals depend on feed water quality. Typically, backwash and air scour occur every 30–60 minutes, with CIP every few weeks or months.

4. What is the service life of this UF module?
Under normal operating conditions and regular maintenance, the module can last 3 to 5 years.

5. Is the module suitable for drinking water systems?
Yes. The materials are safe for potable water and meet international quality and safety standards.

6. Can the housing be customized?
Yes. Depending on your system and environment, PVC, ABS, FRP, or stainless steel housings can be provided.

7. Is it compatible with my existing skid or rack system?
If your system was designed for Nitto HYDRAcap®MAX60, this module will fit without modification.

8. Do you provide OEM branding and technical support?
Yes, we offer OEM/private label services, engineering consultation, and technical support during and after installation.

Conclusion

The HYDRAcap®MAX60 Industrial Grade UF Module is a proven, high-efficiency solution for advanced water treatment applications. As a trusted equivalent to the Nitto Hydranautics HYDRAcap®MAX60, it offers superior performance, operational cost savings, and complete system compatibility.

Whether for new installations, retrofits, or expansions, this ultrafiltration module delivers excellent contaminant removal, extended lifespan, and minimal maintenance. Its high membrane area, low-pressure operation, and advanced cleaning options make it a top-tier choice for municipal and industrial engineers worldwide.

If you are looking to optimize water quality, reduce RO membrane fouling, or ensure water reuse compliance, the HYDRAcap®MAX60 is your smart, scalable, and sustainable filtration solution.