Home / Products / Water filter element / Ultrafiltration Membrane Element /

SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent
SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent

SFD-2860 Industrial Grade UF Module DupPont DOW Equivalent

DupPont DOW SFD-2860 Industrial Grade UF Module Equivalent

Product Introduction

The SFD-2860 Industrial Grade UF (Ultrafiltration) Module is a high-performance water treatment solution, engineered to meet the filtration demands of modern industrial and municipal systems. Developed as a reliable equivalent to the Dupont/DOW SFD-2860 model, this module offers full compatibility in structure, dimensions, and hydraulic performance. It is the ideal replacement option for existing systems using DOW UF modules, as well as for new system designs that require long-lasting, high-quality ultrafiltration.

Constructed using hollow fiber membranes made from PVDF (polyvinylidene fluoride), the SFD-2860 ensures robust mechanical strength, excellent chemical resistance, and high filtration accuracy. It is designed for consistent operation in challenging water conditions, removing bacteria, viruses, suspended solids, and colloidal particles with ease. Whether used for drinking water purification, RO pretreatment, or wastewater recycling, the SFD-2860 module provides a dependable, low-maintenance solution.

 

Ultrafiltrationmodules23.jpg


Working Principle

Ultrafiltration is a membrane filtration process that separates particles and impurities from water using a semi-permeable membrane. The SFD-2860 module operates in an “outside-in” flow pattern, where feed water flows from the outside of the hollow fibers to the inside, while contaminants are retained on the outer surface.

Filtration Process:

1.    Feed water enters the module housing and surrounds the hollow fibers.

2.    Clean water (permeate) passes through the membrane wall into the inner core of each fiber.

3.    Contaminants, including suspended solids, microorganisms, and colloids, are blocked.

4.    Backwashing and chemical cleaning (CIP) cycles are periodically initiated to remove fouling from the membrane surface.

This process ensures stable flux, high filtration efficiency, and long membrane lifespan while operating at low pressure and with minimal energy consumption.

 

UltrafiltrationMembrane27.jpeg


Key Features

·         DUPONT DOW SFD-2860 Equivalent – Fully compatible with original DOW model dimensions and system configurations.

·         Advanced PVDF Membrane Material – Offers excellent fouling resistance, mechanical durability, and chemical stability.

·         Precise Filtration – Effectively removes particles ≥ 0.03 microns, including viruses and bacteria.

·         Low Energy Operation – Requires lower pressure, reducing energy costs over the long term.

·         Long Service Life – Operates for 3–5 years under standard conditions with proper cleaning protocols.

·         Easy Integration – Plug-and-play design for DOW module retrofits or OEM systems.

·         Minimal Maintenance – Features automated backwash and optional chemical cleaning system.

·         Safe for Potable Water Use – Suitable for municipal and commercial water treatment applications.

 

UltrafiltrationMembrane3.jpg


Technical Parameters

Item

Specification

Model

SFD-2860 UF Module

Membrane Material

PVDF (Polyvinylidene Fluoride)

Configuration

Hollow Fiber

Nominal Pore Size

0.03 μm

Membrane Area

86 m²

Outer Diameter of Fiber

1.3 mm

Inner Diameter of Fiber

0.7 mm

Filtration Mode

Outside-in

Operating Pressure

0.1–0.3 MPa

Maximum Pressure

0.4 MPa

Operating Temperature

5–45°C

pH Range (Operation)

4–10

pH Range (Cleaning)

2–11 (short-term 1–13)

Backwash Interval

Every 30–60 minutes

Cleaning Method

Backwash, air scouring, CIP

Housing Material

FRP / PVC / Stainless Steel / ABS

Connector Type

Matches DOW SFD-2860 standard fittings

 

Applications

The SFD-2860 UF module is used in a wide variety of applications where high-efficiency and stable water purification is essential.

1. Municipal Water Treatment

Ensures the delivery of clean, microbiologically safe drinking water by removing pathogens and suspended matter from raw water.

2. Reverse Osmosis Pretreatment

Acts as an effective barrier against particles, organics, and biological fouling before water enters RO systems—enhancing RO membrane lifespan and performance.

3. Industrial Process Water

Used across electronics, pharmaceuticals, textiles, and food industries for producing high-quality process water.

4. Wastewater Treatment & Reuse

Filters secondary effluent for water recycling applications, contributing to sustainability and reduced water discharge.

5. Seawater Desalination Pretreatment

Pre-filters seawater before reverse osmosis to remove solids and biofoulants, protecting downstream systems.

6. Cooling Water Systems

Improves water quality in industrial cooling towers and reduces biofouling, scaling, and corrosion.

7. Agricultural Irrigation

Removes organic matter and debris to ensure clog-free drip and sprinkler irrigation systems.

 

UltrafiltrationMembrane7.jpg


FAQ

1. Is your SFD-2860 module identical to the DOW model?
Yes, it is a functionally equivalent replacement that matches the DOW SFD-2860 in performance, configuration, and installation.

2. What’s the expected service life of the SFD-2860 module?
Typical lifespan is 3–5 years, depending on feed water quality, cleaning frequency, and operating conditions.

3. Can I use this UF module for drinking water production?
Absolutely. It is made of safe, food-grade PVDF materials suitable for municipal and potable water systems.

4. How often should I clean the membrane?
Backwash every 30–60 minutes, and perform CIP (chemical cleaning) every 1–2 weeks, depending on fouling levels.

5. What kind of cleaning agents are compatible?
Standard agents like NaOH (alkaline), citric acid (acidic), and sodium hypochlorite (oxidizing) are compatible with the PVDF membrane.

6. What contaminants does it remove?
Removes suspended solids, bacteria, viruses, colloids, turbidity, and organic macromolecules ≥ 0.03 microns.

7. Is it compatible with existing systems that use DOW modules?
Yes, the SFD-2860 matches DOW module dimensions and ports, so retrofits are seamless.

8. Do you provide technical support and OEM services?
Yes, we offer design support, integration guidance, and OEM solutions for custom system development.

 

Ultrafiltrationmodules25.jpg


Conclusion

The SFD-2860 Industrial Grade UF Module is a smart, reliable, and high-performing solution for water treatment professionals seeking an equivalent replacement to the DOW SFD-2860. Its robust PVDF construction, advanced hollow fiber membrane design, and compatibility with a wide range of systems make it the ideal choice for both upgrades and new installations.

Whether you’re working with municipal drinking water, industrial processing, or wastewater reuse, the SFD-2860 provides cost-effective, long-lasting, and high-efficiency filtration for a wide array of water quality challenges. With trusted performance and full compatibility, it’s the solution you can count on to maintain clean, safe, and sustainable water operations.


Get a FREE Quote

RELATED PRODUCTS

Leave a message

If you want to get more details about filter and filtration equipment, you can send E-mail to filter01@lefilter.com. You can consult our professional engineer and specialized sales team with leave a message in below form. We will contact with you ASAP. You also can visit our factory in Henan China.