Coalescence Dehydrated Oil Filter-LYC-25J

Introduction

LYC-J series 25-liter agglomerated dewatering oil filter is an oil filter developed by our company which integrates precision filtration and high-efficiency dewatering, and it can effectively remove particles and impurities and emulsified water and free water in the oil liquid without damaging the quality of the meta-products. For the oil containing a large amount of water, its separation effect is particularly significant, the separation speed is several times to dozens of times the traditional speed.

The agglomerated dewatering oil filter machine different liquids have different surface tension, and the liquid flows through the hole, the smaller the surface tension, the faster the rate of passage, when the different mixed liquids flow into the separator, the first to enter the agglomerated cartridge, agglomerated cartridge has a multilayer filtration media, the aperture of which is increasing layer by layer. Due to the difference in surface tension, the oil passes through the filter layer quickly, while the water is much slower; and because of the hydrophilic material used in the coalescing filter element, the tiny water droplets are adsorbed on the surface of the filter layer, thus resulting in the coalescence of the water droplets. By the role of kinetic energy, small droplets race through the openings, gradually converge into large droplets, and under the action of gravity settling and separation of oil, through the polymerization of oil after the filter element, there is still a smaller size of the water droplets in the inertia forward to the separation of the filter element. The separation filter element of the agglomerated dewatering oil filter machine is made of special hydrophobic material, when the oil passes through the separation filter element, the water beads are blocked outside the separation filter element, while the oil passes through the separation filter element and is discharged from the outlet.

Polymerization Dewatering Filter Machine Recommendation: 

LYC-10J Polymerization Dewatering Filter Machine LYC-J Series Polymerization Separation Filter Machine LYC-50J Polymerization Dewatering Filter Machine.

Product Features 

1. The high pressure line is equipped with an overflow protection device: it can effectively protect the safety of the hydraulic system.

2. Thermal relay protection: prevent motor damage caused by motor overload.

3. The suction port coarse filter protects the oil pump: extends the service life of the main filter.

4. Two-stage fine filter after the pump: make the oil quickly reach a high degree of cleanliness.

5. Fine filter can be customized: according to the different needs of users, choose different precision to achieve the required requirements.

6. The oil filter shell adopts quick-opening structure: without any tools, the top cover can be opened quickly and quickly to replace the filter element.

7. The panel is equipped with a pressure gauge: when working, it continuously indicates the running condition of the system and the degree of contamination of the filter element.

LYC-25J Agglomerated Dewatering Oil Filter Applications: 

1. turbine oil and transformer oil purification 

2. hydraulic lubrication system oil de-watering and impurity removal filtration 

3. access to the hydraulic lubrication system to improve the cleanliness of the system.

Q&A

Q：Oil filter according to which parameters for selection?

A: Understand the type of oil: hydraulic oil, lubricating oil, fuel oil, etc.; oil viscosity: high viscosity oil, oil containing more water, etc.; impurity content: dehydration, decolorization, filtering impurities, etc.; precision requirements: NAS grade; flow; system pressure.

Q: Is the fuel explosion-proof? What kind of oil pump is better?

A: Gasoline, diesel, kerosene, ethanol, etc., the choice of oil filter need to use explosion-proof motor. Such oils have low viscosity, high volatility, especially kerosene on the pump sealing performance requirements (Viton), so it is recommended to use a special pump when selecting the pump. Suggested configuration: stainless steel cylinder + explosion-proof motor + special pump.

Q: How to choose the oil filter for anti-oil?

A: EH oil, also known as anti-fuel oil, composed of phosphate ester, transparent appearance, new oil slightly yellowish, commonly used in electro-hydraulic control systems in power plants, at very high temperatures can also be burned, but it does not spread the flame. Normal working temperature of 20-60 ℃, the sealing material used: Viton, contact with the metal material as far as possible to choose stainless steel. Selection of oil filter recommended configuration: stainless steel cylinder + special pump 

Q: What are the explosion-proof oil filter?

A: First understand the explosion-proof motor EX, according to the explosion-proof grade: BT4, CT4, coal explosion-proof “MA” (coal mine must have coal safety standards). Ordinary explosion-proof BT4; shell protection grade IP55; explosion-proof oil filter should also be equipped with explosion-proof switch. (Attachment: Coal Safety Certificate) 

Q: How to choose the oil filter configuration for filtering cutting fluid?

A: Cutting fluid is made of cutting fluid oil blended with water, which plays the roles of lubrication, cooling, cleaning and rust prevention in the cutting process. The main impurity component of the cutting fluid after use is metal chips and powder. This kind of filter should use magnetic filter before the pump, and install filter net or filter rod in the oil suction port, and one level of filtration after the pump.

Q: How is the filtration effect of our oil filter?

A: Our oil filter can improve 2-3 NAS grades on the basis of crude oil under normal circumstances. The filtration effect of the oil filter can reach NAS6 grade (3 micron).