HLYC-G Series High Solid Oil Filter HLYC-G100

Introduction

HLYC-G series high solid content oil filter is especially adapted to the occasion of high solid content.HLYC-G series high solid content oil filter HLYC-G100 is especially adapted to the clarification and filtration of waste oil regeneration and food oil. Adopting special filter material as filter element, the thickness of its filter layer is large, which is 10~15 times that of general filter material, with high filtration efficiency, it can effectively remove suspended matters, particles, rust, etc. in the liquid. With gradual change of hollow diameter structure, the filter aperture is large outside and small inside, which has excellent deep filtration effect. Scientific design and compact structure can withstand high filtration pressure. Unique deep mesh structure makes it have very high dirt-holding capacity. The filter element has a single component, stable chemical performance and good compatibility with the medium.

HLYC-G series high solid content oil filter has the following features:

1, HLYC-G series high solid content oil filter adopts special pump for high viscosity oil, which conveys fluid smoothly, without pulsation, with low noise and vibration, and has strong self-absorption ability.

2、It can filter many kinds of corrosive media, and the use temperature can reach 200°℃.

3、It is especially suitable for filling and filtering high viscosity oil.

4、The pipeline is equipped with overflow protection device, which can effectively protect the safety of the hydraulic system.

5、Protected by thermal relay to prevent motor damage caused by motor overload.

6. The coarse filter at the suction port protects the oil pump and prolongs the service life of the main filter.

7. The fine filter can be selected with different precision according to the different needs of users to achieve the required requirements.

Applications:

Filtration of high viscosity, high solids lubricants

Filling of high viscosity, high solids lubricants

Bypass filtration during operation of high viscosity, high solids lubricant systems

Technical parameters:

Working medium: mineral oil, emulsion, water - glycol, phosphate ester hydraulic fluid